Your first close

A step-by-step walk from an empty Portfolio to one company's first closed month in Haruno for Mac: what to export from QuickBooks Online, what to click, what you should see at each step, and what to do when next month's exports arrive.

Before you start

To close a company's first month you need Haruno for Mac on a Mac with Apple silicon, and two reports from the company's QuickBooks Online: a Balance Sheet and a Profit and Loss, exported to Excel on an accrual basis with one column per month, ending on the last day of a month whose books are final. Everything else is optional, including the company's reconciliation workbook. If the company is connected to QuickBooks (Connect a company), Haruno brings in those months itself and you skip the exports; the steps below say where. Adding files, drafting the mapping and closing run on your Mac, send nothing and use none of your AI allowance. The questions for management that Haruno drafts when a close ends go through the assistant and use it.

What you need

  • A Mac with Apple silicon and macOS 15 Sequoia or later. This page walks through Haruno for Mac; Haruno for Windows closes months the same way, with its own menus and some different labels.
  • Haruno for Mac, from haruno.ai/download/macos, and your Haruno account signed in if you want to ask Haruno about the results or add a company from QuickBooks. Chat waits for a one-time secure-sandbox download after the first launch; the steps on this page do not.
  • Optional: the reconciliation workbook, a budget, and other QuickBooks reports such as the Statement of Cash Flows or the A/R Aging Detail. Add them now, with the two statements: the mapping reads only the kinds of file it was drafted from.

Details: System requirements, Sign in, The one-time secure-sandbox download, What a company sends and Haruno on Windows.

Get the exports right first

Most first-close problems start in the export. Check these in QuickBooks Online before you export:

SettingWhat the file must showIf it is wrong
Accounting methodAccrual (the footer reads Accrual Basis)The close refuses a cash-basis statement, and the draft does not catch it.
ColumnsOne per month (Balance Sheet: per month-end)A Profit and Loss with quarter, multi-month or year-to-date columns is not imported.
FormatExcel (.xlsx), as QuickBooks exported itFrom a CSV, subtotals drop out of the draft.
PeriodEnds on the last day of a monthA Profit and Loss column for part of a month is skipped. A Balance Sheet column dated before its month ends is left out, and a Balance Sheet with no other date is refused: export it again as of a month end. A month exported before it ended is reported but stays open until you export it again.
LayoutQuickBooks' standard title, header and footer, rows expanded, no comparison or percentage columnsA title such as P&L is not recognized.
One export per statementThe whole history in one Balance Sheet and one Profit and LossWhere a company holds two exports of one statement, the draft is made from the one that runs to the latest month (the later export if both run to the same month), and the review says which file it left out; every close still reads both. A workbook that holds other sheets as well still stops the draft.
Account numbersTurned on before the first export, if whoever keeps the books agrees, then left as they areWithout numbers, Haruno reads cash from the asset accounts under a balance-sheet line that says cash or bank, and the review lists them under Cash account name for you to check and add to; if no line reads as cash, the review marks it as needing your attention. Switching later renames every account, and the mapping no longer recognizes them.

Why history: burn and runway are measured from the change in cash between month-ends, so a Balance Sheet with a single date gives Haruno nothing to measure them from (see How much history to send). Every setting, step by step: Export settings that matter.

The first close locks the months it reports
There is no month to pick. A first close from exports covering seven months locks all seven, except a month with no Balance Sheet or one exported before it ended, which is reported but left open, and the result says so. A first sync from QuickBooks brings in up to 24 months, and the first close locks every one that has ended. A figure in a locked month then changes only through a reopening with a written reason, which stays in the month's History for good. Export or sync only months whose books are final.

Haruno connects to QuickBooks Online and only reads from it; the close never writes to QuickBooks. Every step here uses the app's own controls: the chat assistant can explain, but it cannot approve a mapping or close a month.

If your sidebar has no Portfolio row, see If your Haruno has no Portfolio. Bring books from an earlier version in with Import existing books… before you add any company by hand: see Import books from an earlier version.

Add your first company

Click Add company on the Portfolio (⌘1), type the company's name, choose its Reporting currency and Fiscal year-end month, and click Save. Only the name is required, but set the currency and year-end now if you know them: Haruno will not approve the company's mapping or create its first report until both are set.

For a company connected to QuickBooks, use From QuickBooks instead. When you are signed in, the Company details sheet has a switch at the top, From QuickBooks | Add manually: pick the company and click Add to this computer. Haruno creates the company, fetches up to 24 months and opens its page, which reads Fetching months from QuickBooks… until they are in. There are no files to add, so go on at Draft the mapping. The sheet in detail: Add a company from QuickBooks; connecting a company, Sync and what is fetched: QuickBooks Online.

  1. Open the Portfolio.

    Click Portfolio in the sidebar or press ⌘1. With no company yet, it reads Build your portfolio.

  2. Click Add company.

    Or choose Books ▸ Add company…. The Company details sheet opens. If it opens on From QuickBooks, choose Add manually.

  3. Type the company's name.

    Use the name you want on its reports: if you rename the company later, its reports print the new name. See the rules for names.

  4. Set the reporting currency and fiscal year-end.

    Click Company details (optional) and, under Reporting, choose both; Use these fills them from your books defaults. With only one chosen, Save turns off. Tax jurisdiction, Legal entity type and EIN are optional, and the close does not use them today; an address is optional too, and the investor report prints it.

  5. Click Save.

What you should see after saving

The company's page opens as its setup page: the Company details block, with an Edit company details button, and the Add data panel. Once it has files, a step rail shows where you are: Add data, Propose mapping, Review the draft, Ready to close. On the Portfolio, its card reads No report yet until the first close; open it from there to carry on at the same step, even after quitting Haruno. A list of your companies sits beside the page, when the window is wide enough, so you can switch to another company in one click.

Why the currency and year-end come first

Haruno never converts figures: a file that states another currency is refused at the close, and the reporting currency is fixed once a month has been closed. The fiscal year-end can change later, from the next close, and year-to-date figures follow it. More: Company details and Year to date and the fiscal year.

Add the company you mean to close, not a test one. You can archive a company to take it out of the Portfolio and restore it later, and its books are kept; on a Mac you can then delete its data for good (see Removing a company). Your subscription covers the number of companies agreed with our team, so tell us when you take one on (see Pricing).

Add the exports

Drop the company's files or a folder onto the Add data panel on its setup page, or use Upload files or Open a folder. Haruno copies each Excel (.xlsx), CSV and PDF file into the company's books and reads it right away. Your original files are never moved or changed, and nothing reaches the ledger until you close.

  1. Add the files.

    Drag them onto the panel, or click Upload files and then Add files. Open a folder adds every Excel, CSV and PDF file in the folder and its subfolders, so choose one that holds only this company's files.

  2. Read the results, then click Done.

    A sheet titled Data added to and the company's name lists one row per file. Check each row as below.

What you should see after adding

Under each file's name, Haruno shows the report's title and period, what it read the file as with its basis, such as Profit and Loss · Accrual basis · 33 rows, a currency only when the file declares one, and the day it was exported where the file states one. On the setup page, each file's Read as button names what Haruno found, such as Automatic (Balance Sheet).

Check before you draft

  • Read as names a Balance Sheet and a Profit and Loss, one export of each.
  • Each period is the one you meant and ends on a month's last day.
  • Both say Accrual basis, not Cash basis.
  • No currency appears, or it is the company's reporting currency.
  • No file says Not read or Copied · Couldn't read.
  • No file says Not claimed, Copied · Format not recognized or Copied · Not used, unless you mean to leave that file out.
  • No file says Copied · Another company's export: if it belongs to another company, remove it and add it there.
Fix a wrong file now, while you still can
While a company has no draft mapping, each file on its setup page has a trash button, Remove from Company, which moves Haruno's copy to the Trash and leaves your original alone (discard an unapproved draft first with Discard this draft). Once the mapping is approved the page stops listing the files, unless one cannot be closed as it is, and a close reads every file in the company. After a close, the company page's Files tab lists the files again: a file a close has read stays, because its figures are in the months already reported, but a file no close has read can be taken out: one added or changed since the last close, one the mapping leaves out, or one Haruno could not read.

More: What the import tells you, Files Haruno refuses or skips, Removing a file and Where the books are stored.

Draft the mapping

Click Draft the mapping on the setup page's Propose the mapping card. Haruno reads the files once and drafts the crosswalk from the company's chart of accounts to its statement lines, taken from the export's own sections and QuickBooks' own formulas. Drafting closes nothing; you check and approve the draft in the next step.

  1. Leave every file's Read as on Automatic.

    A kind you choose in Read as applies to every file in the draft: with one file set to Budget, every file is read as a budget, and the company cannot close until you draft again.

  2. Click Draft the mapping.

    The card shows Reading this company's files…. Stop reading ends the draft and writes nothing.

  3. Read the What was drafted card.

    It sums up the draft, for example “2 items need your attention.” The review form, headed Review the mapping, appears under it.

When Draft the mapping is unavailable or refused

What the setup page showsWhat to do
A sentence beginning “None of these files is a Balance Sheet” or “None of these files is a Profit and Loss”Add the missing export. A Profit and Loss with quarter columns counts as missing: remove it and add one exported by month.
two of these workbooks are the same statement (PL) — hand in one export per statementRemove one, and export the whole range as one report. Two plain exports of one statement no longer stop the draft: it is made from the one that runs to the latest month, and the review names the file it left out. This message now comes only when one of the two is a workbook that holds other sheets as well.
A sentence beginning “none of these workbooks reads as a statement export”Check each file's title and format against the export settings above.
another close is runningWait: Haruno runs one draft or close at a time.

The draft keeps QuickBooks' own captions, such as Total for Current Assets, as the statement lines. Only a line the draft had to name itself, such as two sections with one caption, can be renamed: the review form has a New name for this line field for it, and only before the first close. More: Draft the mapping.

Review and approve the mapping

Answer the rows under Needs your attention, read the rows under Check and confirm, and click Approve mapping. The form asks the few things the files cannot answer. No answer is written until you approve, though a Read and confirmed tick is saved as you make it, and approval needs the company's reporting currency and fiscal year-end.

  1. Set the reporting currency and fiscal year-end, if the form asks.

    Approve mapping stays off until both are set: click Company details…, choose both, and click Save.

  2. Deal with the rows under Needs your attention.

    Here the draft had to leave something out. For an account on two lines, choose the line in the row's picker. A total the draft could not read is left out of the statement: discard the draft, replace the file with a fresh Excel (.xlsx) export and draft again. For a file in another currency, replace it, or change the reporting currency if the company really reports in that one. A Balance Sheet run before its month ended is refused in a row that says which month end to export it as of. Rows you leave do not stop approval.

  3. Read the rows under Check and confirm.

    Change a reading, such as an account type, only where it is wrong. Tick Read and confirmed on a note once you have read it; the tick is saved.

  4. Click Preview changes, if you answered anything.

    It writes nothing and shows each change line by line.

  5. Click Approve mapping.

    The card changes to Ready to close the month, with a Close month… button. The mapping stays editable: every change goes back through the same review. If a file cannot be closed as it is, such as a Balance Sheet run before its month ended, the card reads Not ready to close yet instead: add the export the file's note asks for, then remove the old file.

What the review may ask

A company that sent only its two statements is asked little: the account types, which accounts hold the company's cash where its chart has no account numbers, and a report scale or an account on two lines if its exports raise them. Optional files add questions such as materiality. Haruno offers candidates and your Settings ▸ Books defaults as buttons, but never applies them for you. Every question: Questions only you answer.

Answer before the first close
Rows you leave alone do not stop a close, but they shape what it reports, and an answer given after a month is locked can mean reopening it.

Haruno does not yet ask for a useful life or a depreciation method. For a company closed from its statement exports alone, the review does not ask for materiality, and the checks that use it apply $1,000. Some row sentences name internal keys: use the control under the row, where it has one.

If Approve mapping stays off, a message under a field says what to fix, such as “Type the amount in plain digits — 2500, not 2,500.” More: The review form.

Close the month

Click Close month…, read the pre-flight, and click Close month. In one run, the close reads every file in the company (for a QuickBooks company, every synced month), posts the figures to the ledger through the mapping, runs the checks, builds the reports and locks every month it can stand behind; a month it cannot yet lock stays open, and the result says why.

  1. Click Close month… on the Ready to close the month card.

    Or choose Books ▸ Close Month… while the company's page is open. The Close month sheet runs a pre-flight that writes nothing.

  2. Read the company's card.

    A green Will close means nothing the pre-flight can check stops the company. It checks the mapping and the folder, and opens every file in it as the close does, stopping at the first one it cannot read; it also catches a mapping that reads none of the files and a Balance Sheet run before its month ended. It cannot run the checks or tell whether a figure in a locked month would change, so the close can still stop. A red Will not close comes with the reason; see below.

  3. Click Close month.

    Leave the sheet open until the result shows: its only button is Cancel, which stops the close.

  4. Read the result, then click Done.

    The card shows Closed, the findings and questions the checks reported, the months it locked (for example “Locked June 2026”), and the company's Reports card. Sentences the close adds on its own, such as why there is no reconciliation binder or which month it left open, sit under the status, and the rest of what it noted is under a collapsed Notes list.

Close your first company from its own page

Close month… on a company's page closes only that company. The one in the Portfolio toolbar covers every company: each is listed, the ones that will close are closed by name, and a company that isn't ready is left out with its own sentence and an Open company link (see When a portfolio close cannot start).

When the pre-flight says no

What the sheet showsWhat to do
Set the reporting currency and fiscal year-end in company details before creating the first report.Cancel, set both with Edit company details in the Company details block, then close again.
Approve the mapping before creating the first report.Approve it on the review form, then close.
Will not close, with a sentence such as “This company’s mapping doesn’t read a Balance Sheet, and closing a month needs one.”Cancel. Add the missing export if it is not among the files, click Draft again on the setup page (it replaces your recorded answers), then review, approve and close.
A sentence such as “This company’s mapping reads none of its 3 files (…), so there is nothing to close with.”Cancel. Click Draft again on the setup page so the mapping reads them (it replaces your recorded answers), or take the files out of the company's files, then close again.
A sentence such as “This company’s mapping reads a Balance Sheet, but none of the company’s files is one, and closing a month needs one.”Cancel and import the Balance Sheet export again, then close again.
A sentence beginning “No mapping has been approved for this company yet”Cancel, open the company (on the Portfolio's sheet, click Open company), and draft and approve its mapping with Draft the mapping, then close again.
A sentence beginning “This company has no exports to close with yet”The company has no files yet. Cancel, add its Balance Sheet and Profit and Loss, then close again.
A sentence beginning “This company has no QuickBooks months to close with yet”The months have not arrived. Cancel, click Sync on the company's page, then close again.
A sentence such as “'broken.xlsx' couldn’t be read (…). Export it again, or take it out of the company’s files, then close again.”Cancel and take that file out of the company's files with Remove from Company, add a fresh export if you need one, then close again. The company's Files tab offers Remove once the company has a report; before its first report the app has no Remove control for it yet, so write to support with the company and the file name. Haruno stops at the first file it cannot read, so a second one shows only after you take the first out.
another close is runningWait for it, or cancel it from its bar above the page.

Reading the result

Chip on the cardWhat happenedWhat to do
Closed (green)Every step ran; the reported months are locked, except any month the card says it left open.Click Done and read the results.
Partly closed (amber)The figures were posted, but a later step, named on the card, did not finish. No month is locked unless the failed step came after Locking the month.Send no report from this run. Fix the cause and close again.
Did not close (red)It stopped before posting, or posting was refused. Nothing new was written or locked.Read the sentence on the card, which says what stopped it, fix the cause and close again.

Where a step gives no reason, the card shows a short label instead. For a label such as apply failed, see Short labels: what to check. If the pre-flight or the card names a file the close could not read, take it out with Remove from Company on the company's Files tab, or beside the file on the card. A file you added since the last close can be taken out the same way. Then close again.

Findings never stop a close
A month whose statements do not tie is locked all the same. The pre-flight does not run the checks, so you see the findings only after the lock.

A company without a reconciliation workbook

It still closes: the result says why there is no reconciliation binder, the months lock as not reconciled, and the Reports card has no Reconciliation row. No balance has been reconciled. See Companies without a workbook. Every step of a close, and what Cancel leaves: While it runs and The result.

Read the results

After its first close, the company's page is its dashboard: the close state in the header, the Reports card, and seven tabs (see A company's page). Work through the findings, check the statements, then export each report you send as a PDF.

  1. Read the header.

    It shows the latest month-end, for example “Close June 2026”, the close-state chip, and the checks left unresolved. Click the chip to see each month in the Months sheet.

  2. Open Findings & questions.

    Findings are defects in the books to fix, each with a severity; questions ask you to look at something and never mark a month as an exception. Few findings do not mean few problems: a check with no file to test says nothing (see What runs on a Balance Sheet and a Profit and Loss alone). The Questions for management card at the top holds the questions Haruno drafts for the month once the close ends; it takes a minute or two (Questions for management).

  3. Open the statements.

    Click the Statements row on the Reports card; it opens the Statements tab (see Open a report). Compare its totals with the same reports in QuickBooks: the checks test that the balance sheet balances and, where it has a Net Income row, that it agrees with the profit and loss, but no check compares each line with QuickBooks.

  4. Export it as a PDF.

    On the Reports card, click the … beside Statements and choose Export…, then pick a folder: Haruno saves a PDF and a web page there. A statement with many months is split into blocks of months, each repeating the row labels, and a table that runs onto another page starts it with its headings. The PDF turns landscape only when wide tables make up at least half of the document, as a statement package with many months does; in any other report a wide table is split into more blocks on an upright page. The PDF always has white pages, whatever your Theme. Still check that every month you are reporting is in it. Paper size and margins: Export a report as a PDF and a web page.

  5. Send each report to the people it is for.

    Open the Investor report tab, add a comment if you like, and click Mark as Reviewed…: an investor report nobody has marked reviewed is exported as a draft. Then export it the same way. Reports follow the books and Haruno keeps no earlier copy, so keep the PDFs you send.

What the close-state chip says

The chip reads fully reconciled (green) when the books hold a reconciliation for the month and no high or medium finding was open when it was locked, reported with exception (red) when at least one was, and not reconciled (grey) when the month has no reconciliation and no such finding was open, so nothing was tied to a schedule. The months are locked in every case. Fixing a finding afterwards changes the chip only once the month is reopened and closed again. See Close states.

What “fully reconciled” does not mean
It does not say that every balance was reconciled, and it is not an audit opinion. A month with no reconciliation reads not reconciled instead, even when another month of the same company was reconciled.

The reports on the Reports card

ReportWhat it isWho it is for
StatementsThe statements, notes and analysis panels in the company's own layout, plus cash flows and the trial balance. It names open findings.Management and your own file, not investors
ReconciliationEach reconciliation, recomputed against the ledger. Only if the company has any.Your working papers
Investor reportCash, Burn (3-mo avg), Runway and cards such as gross margin. No findings, reconciliation, budget against actual or close lock.The company's investors
Adjustments logA CSV of every figure that moved in a reported month; only a header row after a first close.Your file

Statements, Reconciliation and Investor report open their own tabs, and each one's … menu offers Export…. The Adjustments log row opens adjustments.csv, the one file a close keeps, and its menu offers Open, Reveal in Finder and Save a Copy…. More: What a close writes.

Ask Haruno about a figure

Ask Haruno and the other ask buttons, such as Explain this finding, put a question about that card in the chat box, which opens beside the page; nothing is sent until you press Return. See Ask from a company page and Where your data goes.

If a reported figure is wrong

Correct it in QuickBooks Online, not in Haruno: add the corrected export with Books ▸ Import Exports… (keep the file's name: Haruno saves it beside the first as “name 2.xlsx” and reads it after that one, so its figures win; for a QuickBooks company, sync again), then close. When the lock stops the close, click Correct… (see When the pre-flight lists locked months): record the difference in the next open month, which leaves the reported month as it was, or reopen each locked month it changes (usually every later month-end too) with a written reason and close again. Then check Restatements… in the Months sheet and, for a reopened month, the close's remark “This close changed N figures already reported”: every figure you corrected should be listed. If one is not, write to info@inferara.com before you send anything. Step by step: Correcting a month already reported.

Next month

Each month, export the month just ended from QuickBooks Online, add it with Books ▸ Import Exports…, and close again; for a company connected to QuickBooks, click Sync on its page once the month has ended instead of exporting. The approved mapping is applied as it stands, so there is no review. The close posts and locks the new month, and stops if a new file would change a figure in a month already locked.

  1. Wait until the month's books are final in QuickBooks.

    Bank reconciliations done and adjustments posted.

  2. Export the month.

    The Balance Sheet as of the month's last day and the Profit and Loss for the month, on accrual and to Excel, plus the company's optional reports.

  3. Open the company and choose Books ▸ Import Exports….

    In the Upload company files window, which takes files, not folders, select the files and click Add files.

  4. Check the Data added sheet, then click Done.

    Check the company, the period and Accrual basis on each row. A file saved under a name already in the company is saved beside the earlier one as “name 2.xlsx”. When Haruno could read it and the mapping reads it, the row adds that the close reads it after that one, so its figures count. A copy Haruno could not read or did not recognize says only that it was saved beside the earlier file; its label says the rest. A row that says Copied · Not in the mapping is left out by the next close: click Draft mapping again beside it to include it, which replaces your recorded answers. A file you added since the last close can still be taken out with Remove from Company on the company's Files tab.

  5. Click Close month… in the company's header.

    If the card says Will close, click Close month; the result lists the new months after Locked. If it says Will not close, see below.

  6. Work through the findings, then export and send the reports.

When the pre-flight lists locked months

After a first close, the pre-flight shows Will close with one grey line under it about the company's locked months, for example “41 months are locked, through June 2026. If a figure in one of them would change, this company won’t close until that month is reopened.” The line stops nothing, and there is no Reopen… on it: it names the months the lock protects, not the months your new files change, because only the close itself posts and compares.

What you seeWhat to do
Will closeClick Close month. Locked months the new files leave unchanged stay locked, with nothing recorded against them.
Will close, with a grey line about locked monthsNothing to do: the line is a note and stops nothing. Click Close month. The run stops only if a figure in a locked month would change, which only the run can find out.
After the run: Did not close, with a sentence such as “March 2026 is locked, and this close would change 1 figure reported for it. Nothing was written. Reopen the month to correct it, or record the difference in April 2026, then close again.”, the first figures that would move, and Correct…A new file changes a figure in those months. For a correction you intend, click Correct… on the card and choose: record the difference in the next open month with a note, which leaves the reported month as it was, or reopen the months (the company's close-state chip and Books ▸ Reopen Month… open the same Reopen sheet), write the reason and click Reopen, then close again. While the months are open a changed figure goes through as a restatement, so read the close's remark “This close changed N figures already reported” and check Restated before you send anything. Otherwise find the export that restates them before you correct anything, and take it out with Remove from Company on the Files tab if you added it since the last close.

A reopening is kept for good in the month's History, with the Mac user account, the time and the reason, so write what changed, why and on whose decision. See What the reason must be.

Keep the monthly routine clean

  • Export each month once. A second export for a month not yet closed is read at every close. Two exports of one statement are read in the order QuickBooks ran them (the stamp on each export's last line), so the newer one counts whatever the file is called; without that stamp on every one, two files with the same name are read in the order they arrived, so the later one counts, and files with different names in the order of their names.
  • Send both statements. A month with only its Profit and Loss is reported but left open, and the result names the Balance Sheet that will lock it.
  • Add every optional file at setup. A kind of file first added later, such as a budget, is not read until you draft the mapping again, which replaces your recorded answers. A later CSV such as a new Stripe export is read only when it is saved as a copy of one the mapping already reads (the same name, saved as “name 2.csv”); otherwise the import says Copied · Not in the mapping.

A new account in QuickBooks

An account added after you approved the mapping has no statement line: the close reports it as unmapped_active_account (high), and the month locks as reported with exception. To map it on its own, open Findings & questions, click Resolve… on the finding (press Re-run checks first if it has none) and choose the statement line it belongs on, and close again; see A new account appears in QuickBooks.

The whole month, from the bookkeeper's exports to the investor update: A month with Haruno. Every detail of a later close: Closing the next month and Each month.

Next steps

The close you ran, in more depth: reading a company's page and its findings, and what to ask each company to export next month.